
BM
BM multicouplings are designed to easily connect simultaneously bigger lines (1″ or 1-1/2″), thus reducing efforts and risks.
Request a Quote
-
- Interchange Stucchi profile
-
- Valving style Flat Face
-
- Connection system Lever
-
- Locking mechanism Pin, Cam
-
- Connection Under Pressure Allowed with Easy CUP
-
- Material / Treatment Aluminium, Carbon steel
-
- Sealing Nitrile NBR
-
- Available threads NPT
-
- Available sizes 1", 1-1/2"
-
- Operating pressure up to 350 bar
-
- Flow rate up to 378 l/min
-
- Temperature -20°C / +100°C
Thanks to the extensive experience of Stucchi in terms of quick couplings and multicouplings, the BM series’ specific design allows to easily connect up to two big lines simultaneously.
- The lever/cam system minimizes the force required to connect the couplings, even with significant pressure trapped in the circuit and under difficult conditions (environment, access, etc.).
- The locking mechanism ensures a full connection and prevents any accidental disconnection.
- Designed to be used with hydraulic oil for fluid power application.
- Safety system on the mobile plate avoids accidental falling during the disconnection.
- Special rubber seal prevents dirt inclusion.
- Robust guidance pins guarantee the correct alignment before the connection.
- Parking station and cover plates protect the system from contamination and damage, as well as to provide a convenient storage solution.
- Flat face couplings are easy to clean, reducing the inclusion of contamination to the hydraulic circuit.
- Internal valve design creates minimal pressure drop, maintaining circuit efficiency in the system.
- Minimal fluid loss during disconnection, reducing fluid loss to the environment.
- Minimal air inclusion during connection/disconnection.
- High resistance at impulse pressures.
- Safe and simple to use.
- Instructions and warnings