Back to products

FAP-ZN

FAP-ZN are specifically designed for being used only with DP and GR multicouplings, when medium range pressures are involved.

Thanks to the internal double valve system FAP-ZN allows connection and disconnection with residual pressure on both sides, while the Zinc-Nickel plating makes it ideal for highly corrosive environments.

Request info

Features

  • - Interchange

    - Interchange

    Stucchi profile

  • - Valving style

    - Valving style

    Flat Face

  • - Connection Under Pressure

    - Connection Under Pressure

    Allowed with Easy CUP

  • - Material / Treatment

    - Material / Treatment

    Carbon steel, Zn-Ni

  • - Sealing

    - Sealing

    Nitrile NBR

  • - Available threads

    - Available threads

    BSP, NPT, SAE

  • - Available sizes

    - Available sizes

    3/8”, 1/2", 5/8", 3/4", 1"

  • - Operating pressure

    - Operating pressure

    up to 350 bar

  • - Flow rate

    - Flow rate

    up to 378 l/min

  • - Temperature

    - Temperature

    -20°C / +100°C

Benefits

  • Flat face is easy to clean, helping to reduce the inclusion of contamination in the hydraulic circuit
  • Minimal fluid loss during connection/disconnection, reducing fluid loss to the environment
  • Minimal air inclusion during connection/disconnection, enhancing correct function of the circuit
  • Internal flow of valve design creates minimal pressure drop, maintaining circuit efficiency in the system
  • Patented internal pressure release valve system allows an easy connection with high internal residual pressure
  • The modular design allows for broad range of port configurations
  • Couplings without locking balls eliminate the “brinelling” effect
  • Zinc Nickel plating qualified for high corrosion resistance
  • For diagnostic purpose of a single line (example: pressure or flow check for a limited period of time), male FAP-ZN may be connected with a Stucchi “A series” flat face female coupling
  • Compact slim design
  • Safe and simple to use

They may interest you

Request a Quote

    Looking for further information?



    Channel*



    *Required Field