- Flat face is easy to clean, helping to reduce the inclusion of contamination in the hydraulic circuit
- Minimal fluid loss during connection / disconnection, reducing fluid loss to the environment
- Minimal air inclusion during connection / disconnection, enhancing correct function of the circuit
- Internal flow of valve design creates minimal pressure drop, maintaining circuit efficiency in the system
- Patented internal pressure release valve system allows an easy connection with high internal residual pressure
- The modular design allows for broad range of port configurations
- Couplings without locking balls eliminate the “brinelling” effect
- For diagnostic purpose of a single line (example: pressure or flow check for a limited period of time), male FAP9HP may be connected with a Stucchi “A9HP series” flat face female coupling
- Compact slim design
- Safe and simple to use
Back to products
FAP-HP
FAP-HP are specifically designed for being used with DP and GR multicouplings, when high range pressures are involved, up to 720 bar.
Thanks to the internal double valve system FAP-HP allows connection and disconnection with residual pressure on both sides.
Request infoFeatures
-
– Interchange
Stucchi profile
-
– Valving style
Flat Face
-
– Connection Under Pressure
Allowed with Easy CUP
-
– Material / Treatment
Carbon steel, Cr3
-
– Sealing
Nitrile NBR
-
– Available threads
NPT
-
- Available sizes
3/8”
-
– Operating pressure
up to 350 bar, up to 700 bar
-
– Flow rate
up to 46 l/min
-
– Temperature
-20°C / +100°C
