quick couplings industry

How to choose a quick coupling for optimal performance

In many sectors, attachment changeover is a procedure that takes place several times during a working day. Carrying this out rapidly and without the use of tools is key in maintaining high levels of productivity.

In addition to the speed of the procedures, there should be no fluid leakage, which would make the working environment dirty and unsafe. This is why quick couplings use internal mechanisms that guarantee the seal once they are uncoupled.

The oil moves in a smaller space in these areas and is constrained to flow around these components. There is also a load loss, commonly termed pressure drop – this phenomenon is inevitable if the versatility of an interchangeable circuit is required. The manufacturer of the quick couplings, therefore, bears the responsibility to provide solutions to take these into account.

Stucchi has been one of the leading worldwide manufacturers of quick couplings for handling pressurised fluids since 1960. In 60 years, we have been providing continual product innovation for the market and improving quality owing to our dedication to research and development.

We carefully assess each choice related to the design, components and mechanisms of our quick couplings. This minimises load losses more effectively compared to other options available on the market.

However, the value provided by quick couplings is not absolute. The characteristics of the circuit in which it will be used will also have to be considered when choosing the most appropriate one.

One of the key factors is the size of the hydraulic fitting compared to that of the pipe.

If it is too small, the quantity of fluid will be excessive for the coupling. This high degree of forceful channelling causes greater load loss and a reduction in the performance of the machinery (slower motion). In the most extreme cases, the circuits overheat beyond their limits causing damage to the components, which are not designed to support these types of operating conditions, thus compromising the functionality of the entire system.

By contrast, an oversized quick coupling will not suffer from these problems, but it will cause excessive clutter in many operating environments and may cause inconvenience or inefficiencies, as well as higher costs.

For these reasons, a load loss table provides fundamental information in choosing the most suitable quick coupling size.

Interpreting the table:

  • the vertical axis displays the flow rate of the hydraulic system;
  • from here, it runs horizontally until it crosses one of the red lines, which represent the recommended quick coupling models;
  • the black dots indicate their maximum flow rate, so if the flow rate of the system is higher, that particular quick coupling should be excluded;
  • at the point of intersection, the load loss is obtained by dropping down vertically to the reading on the horizontal axis.

The size of the quick coupling can thus be immediately identified based on the estimated load loss.

Find out more about the solutions provided by Stucchi for handling pressurised flows – contact us now.

Contact us

Vuoi sapere di più sui nostri prodotti

Soluzioni Stucchi





    Further information


    *Required fields